U-Line BI-2015 - User Manual

www.U-LineService.com
Phone (414) 354-0300 • FAX (414) 354-7905
Service & Parts Tech Lines Phone (800) 779-2547 • FAX (414) 354-5696
OnlineService@U-Line.com
©2005 U-Line Corporation
02/2005
BI2015 — Ice Maker
Installation Guide
™

Summary

Follow Safety Precautions

General Installation Precautions

Electrical Grounding Safety Warning

Critical safety warning regarding electrical grounding requirements.

Prepare Installation Site

Cut-Out Dimensions and Requirements

Specifies required cabinet opening dimensions for proper unit installation.

Other Site Requirements

Power Supply Specifications

Outlines the electrical requirements, voltage, frequency, and amperage.

Water Supply Requirements

Prepare and Install Custom Door Panel

Custom 1;4-Inch Door Panel Insert

Instructions for preparing and installing a custom 1/4-inch thick door panel insert.

Door Panel Installation Steps

Full Overlay Door Panel Preparation

Full Overlay Door Panel Installation Instructions

Removing Existing Door Panel

Attaching the Full Overlay Panel

Assembling and Installing the Door

Installing the Door Components

Adjust Door Alignment

Checking Door Alignment

Adjusting Door Alignment Procedure

Step-by-step guide to correct door alignment issues.

Prepare Plumbing Connections

Water Supply Connection Guide

Detailed instructions for connecting the water supply line safely and correctly.

Prepare Power Supply

Electrical Specifications Overview

Level the Unit Correctly

Leveling Information and Tips

Install the Ice Maker Unit

Installation Troubleshooting

Initial Start-Up Procedure

Starting the Ice Maker for First Use

Start-Up Troubleshooting Guide

U-Line BI-2015 Specifications