PAGE 1 OF 6 0515 IH-1121
ECONOMY
COUNTING SCALE
1-800-295-5510
uline.com
π
H -1121, H -1122
H -1123
WEIGHT
lb
UNIT WEIGHT
lb/pcs
TOTAL COUNT
pcs
COUNTING SCALE
M+
SAMPLE
INSUFFICIENT
HI OK LO
TARE
ZERO
LOW
BATT.
CHARGE
1
7 10 8 9 6 5 4
2 3
0.131 0 10
CK
54321
M+ MC MR
ZERO
.
09876
UWS
CE
SMPL TARE
1 2 3 4 5 6
11 10 9 8 7
OVERVIEW OF CONTROLS
DISPLAY KEYPAD
DISPLAY DEFINITIONS
# NAME DESCRIPTION
1 Weight
Displays the total weight.
2 Unit Weight Displays the unit weight.
3 Total Count Displays the number of counted items.
4 HI, LO, OK Indicators for check counting function.
5
Sample
Insufficient
Indicates when sample size is less than
10 pcs or unit weight is smaller than 4/5
of min. weighing capacity.
6 M+ Indicates when accumulating.
7 TARE
TARE shown on the display indicating
tare weight is set.
8 ZERO
ZERO shown on the display after reset
of the weight to zero.
9 Low Batt
Symbol shown on the display
indicating battery low, recharging the
battery is required.
10 Charge
Light is red when charging, light is
green when charge is completed.
WEIGHT
lb
UNIT WEIGHT
lb/pcs
TOTAL COUNT
pcs
COUNTING SCALE
M+
SAMPLE
INSUFFICIENT
HI OK LO
TARE
ZERO
LOW
BATT.
CHARGE
0.131 0 10
KEYPAD DEFINITIONS
# NAME DESCRIPTION
1 0-9
Numeric Keys
2 CK
Check key. Used when keying in the amount
to check.
3 M+
Add to the memory.
4 MC
Memory clear. Clears out what has been
stored into the memory.
5 MR
Memory recall. Displays what has been
entered into the memory.
6 ZERO
If there is a minor weight displayed, without
anything on the platform, hit the zero key to
clear the display.
7 TARE
The tare key zeros out the weight of a
container being used to hold small parts.
8 SMPL
Sample key. Used when keying in sample
amount.
9 CE
Clear key. Clears out the unit weight
displayed.
10 UWS
Used when manually keying in the unit
weight.
11 •
Decimal Key.
To Next Page
Need help?
General
