U-Line H-1115 - User Manual

PAGE 1 OF 30 1119 IH -1114
INDUSTRIAL COUNTING
SCALE
1-800-295-5510
uline.com
π
H -1114, H -1115
H -1116, H -1117
For best performance, the scale should be located in
a cool, dry place that is free from excessive air currents,
corrosives, vibration and temperature or humidity
extremes.
WARNING! DO NOT place the scale:
• Next to open windows or doors.
• Near air-conditioning or heating vents.
• Near vibrating, rotating or reciprocating
equipment.
• Near magnetic fields or equipment
generating magnetic fields.
• On an unstable work surface.
• In dusty locations.
• In direct sunlight.
PREPARING TO USE THE SCALE
1. Put the scale on a firm, level surface to obtain
accurate weight readings.
2. Adjust the four leveling feet so scale platform is level.
3. Avoid placing scale in direct sunlight or near the
ventilating system exhaust port.
4. Before turning scale on, remove any weight on the
scale platform.
5. Once scale is turned on, it goes through an LCD test
and re-zeros.
6. Please allow scale to warm up 15-20 minutes before use.
7. When appears on screen, scale needs
recharging.
8. Place items being weighed in center of the platform
for accurate weighing. Overall dimensions of the
item should not exceed the platform dimensions.
RECHARGEABLE BATTERY
Powered by 115 VAC or rechargeable battery.
Scale operates up to 120 hours on a fully charged
battery. Recharge the battery when the appears
or every three months when the scale is not being used
for long periods of time.
BEFORE USING THE COUNTING SCALE
ACTIVATE SCALE
LEVEL THE SCALE
• Place the scale on a flat, level surface.
• Using the leveling bubble on the left front panel,
adjust the legs under scale until bubble is centered.
TURN SCALE ON
• Nothing should be on the scale.
• Press ON/OFF located under the left side of the scale.
• Scale counts down to zero and displays the version
on the WEIGHT display.
• Allow scale to warm up for 15 to 20 minutes before use.
Pcs
M
+
QUANTITY
STABLE
WEIGHT
UNIT WEIGHT
lb/1000
∏
1-800-295-5510
8
7
9
4
5
6
1
2
3
0
.
CE
TARE
TOTAL
TOTAL
ZERO
UNIT
WT
SMPL
UNIT
WT
PST
7SMPL
QTY
PST
CHARGING
Para Español, vea páginas 11-20.
Pour le français, consulter le pages 21-30.

U-Line H-1115 Specifications

General

Model	H-1115
Auto Shut-off	Yes
Tare Function	Yes
Capacity	11 lbs
Power Source	2 AAA batteries (included)
Unit Conversion	Yes

Summary

Before Using the Counting Scale

Leveling the Scale

Instructions for ensuring the scale platform is level using adjustable feet and bubble indicator.

Activating and Turning On the Scale

Steps for turning on the scale, including warm-up period and initial display.

Using the Scale - Counting

Counting Operations

Setting piece weight and performing counting with known or unknown item weights.

Tare Functionality

Deducting container weight, including scenarios with unknown container weights.

Using the Scale - Continued

Tare and Accumulation Operations

Using preset tare with known container weights and accumulating weighings.

Totalizing and Recalling Values

Using the Scale - Further Operations

Weight Totalizing and Clearing

Auto Calibration Procedure

Steps for accurately calibrating the scale using calibration weights.

Unit Weight Preset Memory

Using the Scale - Presets and Limits

Recalling and Setting Unit Weight Presets

Quantity and Weight Limit Presets

Setting high limit values for quantity and unit weight.

Troubleshooting

Operating Issues and Recommendations

Common operating issues and recommended solutions for best performance.