U-Line H-5837 User Manual

PAGE 1 OF 36 0319 IH-5836
π H-5836, H-5837
WASHDOWN PLATFORM SCALE
1-800-295-5510
uline.com
SETUP
TOOLS NEEDED
2 mm Allen Wrench 4.5 mm Allen Wrench Phillips Screwdriver
WARNING! Disconnect all power to the scale
before installing, cleaning or servicing. Failure
to do so could result in bodily harm or damage
to the scale.
SELECTING THE LOCATION
The scale should always be used in an environment that
is free from excessive air currents, corrosives, vibration
and temperature or humidity extremes. These factors will
affect displayed weight readings.
Avoid placing the scale next to or near:
• Open windows or doors.
• Air conditioning or heat vents.
• Vibrating, rotating or reciprocating equipment.
• Magnetic fields.
• Equipment that generates magnetic fields.
• Direct sunlight.
• An unstable work surface.
• A dusty environment.
• Large users of electricity, like welding equipment or
large motors.
• Unstable power sources.
UNPACKING THE SCALE
1. Remove the scale parts from packaging.
2. Place the scale on a flat surface.
3. Remove the platform from top of the scale base.
(See Figure 1)
4. Remove the styrofoam pad from under the platform.
Scale Base
Platform
Figure 1
Para Español, vea páginas 13-24.
Pour le français, consulter les pages 25-36.
PARTS
Column x 1 Platform Base x 1 RS-232 Adapter x 1Display Indicator x 1
The Counting Feature
is Not Legal for Trade
HI
OK
LOW
CAL
Current Weight Total Weight
AC Adapter x 1

U-Line H-5837 Specifications

General

Brand	U-Line
Model	H-5837
Category	Scales
Language	English

Summary

Scale Setup Guide

Selecting the Installation Location

Choose an environment free from currents, corrosives, vibration, and temperature extremes for accurate readings.

Assembling the Scale Column

Removing the Shipping Screw

Instruction to remove the shipping screw from the scale base using a 2 mm Allen wrench.

Installing the Platform

Steps to install the scale platform, including removing protective covering and placing it on the base.

Leveling the Scale

How to use the level indicator and adjustable feet to ensure the scale is properly leveled.

Column Assembly Steps

Detailed steps for disassembling and reassembling the scale column using provided tools and hardware.

Connecting Power Options

Attaching Indicator to Column

Instructions for connecting the display indicator bracket to the column using bolts and cables.

Using the AC Adapter

How to connect the AC adapter to the scale and a standard 110 volt outlet for continuous operation.

Battery Operation and Charging

Scale Operation Guide

Prior to Scale Use

General Safety Warnings

Critical safety precautions to prevent damage to the scale or personal injury.

Turning the Scale On and Off

Scale Calibration Procedures

Guide for calibrating the scale using a precision test weight, including single-point calibration.

Single Point Calibration (SPAN)

Detailed steps for performing single point calibration, including zero and full capacity points.

Advanced Operation Modes

Zeroing the Scale

Using the Tare Function

Instructions for taring a container to display only the net weight of the contents.

Basic Weighing Procedure

Parts Counting Operation

Guide to counting uniform parts using the scale, including sample selection.

Sample of Unit Weight for Counting

Check Weighing Function

Setting Check Weight Limits

Operation Modes and Settings

Accumulation of Weights

Using accumulation mode to measure cumulative weight or counting values of sequential items.

Manual Accumulation Steps

Communication and Special Modes

Automatic Accumulation

Dynamic Weighing Mode

RS-232 Communication

Guide to connecting the RS-232 adapter for data output to a computer or printer.

RS-232 Output Specifications

Maintenance and Troubleshooting

Troubleshooting Common Errors

List of common error messages, operating issues, and recommended solutions for the scale.