EasyManua.ls Logo

U-Line H-5819 - User Manual

U-Line H-5819
33 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
PAGE 1 OF 33 0819 IH-5819
DELUXE
COUNTING SCALE
1-800-295-5510
uline.com
π
H-5819, H-5820
H-5821, H-5822
DISPLAY DEFINITIONS
# NAME DESCRIPTION
1 DISPLAY
Displays the total weight, unit weight and
number of counted items.
2
Battery indicator. Indicates battery is low and
needs to be recharged.
3 STABLE
Stable indicator. Indicates the scale weight is
stable.
4 RECHARGE
Charging indicator. Indicates the battery
charging status.
5 ZERO Zero indicator. Indicates the scale is at zero.
6 GROSS
Gross indicator. Indicates scale is displaying
the gross weight.
7 NET
Net indicator. Indicates scale is displaying the
net weight.
8 HI / OK / LOW
Limits indicator. Indicates the High-Low limits in
weighing and counting.
9 M+
Accumulation indicator. Indicates the scale is
in the accumulation mode.
10
LB / OZ / G / KG
Weighing unit indicator. Indicates current
weighing unit.
11 AUTO
Automatic accumulation indicator. Indicates
the scale is in automatic accumulation mode.
12 PCS
Counting indicator. Indicates the scale is in
the counting mode.
OVERVIEW OF CONTROLS
KEYPAD DEFINITIONS
# NAME DESCRIPTION
1 ZERO Zero key. Used to clear and zero the display.
2 SAMPLE SIZE
Sample size key. Used when keying in the
sample amount.
3 COUNT
Count key. Used to enter the counting operation.
4 PRINT Print key. Used to send data to a printer or PC.
5 MODE
Mode key. Used to select the application
mode – weighing, counting, check weighing,
check counting or accumulation.
6 TARE
Tare key. Used to zero out the weight of a
container being used to hold small parts.
7 SET U. WT
Set Unit Weight key. Used to manually key in
the unit weight.
8 U / N / G
Unit / Net / Gross Weight key. Used to show the
unit, net or gross weight.
9 PLU
Unit Weight Memory key. Used to store weights
into scale memory.
10 UNITS Units key. Used to change weighing unit.
11 M+
Memory key. Used to add current weight or
count to memory.
12 MR / HI
Memory Recall key. Used to show total
accumulated weights or counts in memory.
HI key. Used to set high limit.
13 MC / LO
Memory Clear key. Used to clear
accumulated weights or counts from memory.
LO key. Used to set low limit.
14 C
Clear key. Used to clear incorrect numeric values.
15 •
Decimal key. Used to enter decimal place
when values are entered manually.
16 0-9 Numeric keys. Used to enter values manually.
1 16
14
15
2
3
4
5
8
6
109
11 12 13
7
7
8
9
4
5
6
1
2
3
0
•
C
Recharge
HI
OK LOW
2 3 4
∏
1
5 6 7 8
12
11
10
9
DISPLAY KEYPAD
Para Español, vea páginas 12-22.
Pour le français, consulter les pages 23-33.

Table of Contents

Questions and Answers

  • W
    willisjoannaAug 3, 2025
    Why does my U-Line Scales say Load Hi?
    • F
      floreslucasAug 3, 2025
      If your U-Line Scales are displaying 'Load Hi', it indicates that the calibration weight used was too heavy. Ensure you use a calibration weight that is equal to or less than the maximum calibration weight to resolve this issue.
  • B
    Bruce JenkinsAug 8, 2025
    What does Load Lo mean on my U-Line Scales?
    • K
      Kristopher RileyAug 8, 2025
      If your U-Line Scales show 'Load Lo', it means the calibration weight you used is too light. Use a calibration weight that is equal to or exceeds the minimum calibration weight.
  • A
    Adam RiveraAug 13, 2025
    What to do if my U-Line H-5819 Scales display shows -OL-?
    • K
      Kristin BrennanAug 13, 2025
      If your U-Line Scales display shows '-OL-', it means the maximum weight capacity has been exceeded. To resolve this, simply remove some of the load from the platform.
  • Z
    zrochaAug 18, 2025
    What to do if my U-Line H-5819 display FAIL?
    • R
      Richard KellyAug 18, 2025
      If your U-Line Scales display 'FAIL', it indicates that the calibration process was unsuccessful. You should recalibrate the scale to fix this problem.
  • M
    melissa40Aug 23, 2025
    What to do if my U-Line H-5819 display Err 4?
    • M
      Mark WhiteAug 23, 2025
      If your U-Line Scales display 'Err 4', this means the scale requires recalibration. Recalibrate the scale to resolve this issue.
  • M
    Mrs. Emma Martin MDAug 27, 2025
    How to fix a blinking display on U-Line H-5819?
    • L
      Luis MayAug 27, 2025
      If your U-Line Scales display is blinking, faded, or shows 'Bat lo', it indicates that the battery is low. To fix this, recharge the battery.

Summary

OVERVIEW OF CONTROLS

DISPLAY INDICATORS

Explains the meaning of various indicators shown on the scale's display.

KEYPAD FUNCTIONS

Describes the function of each key on the scale's keypad.

SETUP AND INSTALLATION

PLATFORM INSTALLATION AND LEVELING

Instructions for platform placement, leveling, and initial setup.

POWER CONNECTION AND BATTERY

Guidance on using the AC adapter and managing the scale's rechargeable battery.

OPERATION BASICS

BATTERY MANAGEMENT AND CALIBRATION

How to charge the battery, indicators, and initial calibration steps.

SINGLE POINT CALIBRATION

Detailed procedure for performing a single point calibration using specific weights.

MULTI-POINT LINEAR CALIBRATION

Step-by-step process for linear multi-point calibration of the scale.

WEIGHING, TARE, AND ZERO FUNCTIONS

How to perform basic weighing, tare, and zero operations.

COUNTING AND UNIT WEIGHT DETERMINATION

Using counting mode and determining unit weight via sampling or manual entry.

CHECK WEIGHING AND COUNTING SETUP

Setting and executing checks for weight or count against limits.

MINIMUM WEIGHTS CHART

Requirements for minimum sample and piece weights for accurate calculations.

ACCUMULATION FEATURES

Using manual and automatic accumulation for cumulative data.

DATA RECALL AND CLEARING PROCEDURES

Methods to recall and clear accumulated data from memory.

UNIT WEIGHT MEMORY AND RS-232 INTERFACE

Storing unit weights, RS-232 specs, and enabling weighing units.

SETUP MENU OPTIONS

ACCUMULATION AND PRINTER CONFIGURATION

Enabling accumulation modes and selecting printer settings.

BAUD RATE CONFIGURATION

Setting the RS-232 transmission speed for data output.

BACKLIGHT, BEEPER, AND DATE;TIME SETUP

Adjusting backlight, beeper sounds, and setting date/time on the scale.

AUTO POWER-OFF AND MAINTENANCE

Configuring auto power-off and cleaning instructions for the scale.

TROUBLESHOOTING GUIDE

ERROR CODES AND RESOLUTIONS

Common operating issues, their causes, and recommended solutions.

U-Line H-5819 Specifications

General IconGeneral
BrandU-Line
ModelH-5819
CategoryScales
LanguageEnglish

Related product manuals