To Next PageTo Next Page
Need help?Do you have a question about the U-Line H-2331 and is the answer not in the manual?
Do not place scale in direct sunlight, high humidity, or near air conditioning vents. Keep it clean.
Scale is not waterproof. Avoid direct contact with water, humidity, and condensation.
Steps for feeding cables and securing the control panel to the pallet truck base.
Detailed steps for installing the handle onto the pallet truck base.
Read all warnings and instructions before use for safe operation.
Do not operate without training, check condition, avoid slopes, keep body clear, wear protective gear.
Avoid unstable loads, do not overload, ensure fork length matches pallet, lower forks when not in use.
Adjusting the set screw for correct control lever operation (LOWER, NEUTRAL, ASCENT).
Connect AC adapter to charge the internal battery.
Describes the three positions of the control lever: LOWER, NEUTRAL, and ASCENT.
How to zero the scale manually or via automatic rezeroing function.
Deducts container weight from the displayed weight.
Steps to place a pallet, raise it, and get an accurate weight reading.
Plug in AC adapter; charge for 15 hours for full capacity.
Do not use damaged battery/charger, avoid short circuit, proper disposal.
Check wheels, axles, handle, forks, and control lever daily.
Steps to calibrate the scale using specific weight and procedure.
Remove weight from the scale. Contact Uline Customer Service if persistent.
General
