PAGE 2 OF 2 0715 IH-1130
FILLING
MAINTENANCE
MAINTENANCE INSTRUCTIONS
It is important to clean and maintain the dispenser on a
regular, scheduled basis. Failure to do so can result in
dispenser malfunction.
• Open dispenser. Flush tank and pump mechanism
with warm water to remove residue and
contaminate. Refill with new soap and replace lid.
(See Figure 5)
• Cleaning all touch-points on dispenser with a
disinfectant should be part of a regular cleaning
schedule. (See Figure 6)
• Periodically give the dispenser an overall cleaning.
All internal and external parts should be cleaned
thoroughly.
CAUTION! Never use abrasive cleaners when
cleaning soap dispensers.
FILLING INSTRUCTIONS
CAUTION! For dispenser to work properly, use
foam soap only for foaming soap dispensers
and liquid soap only for liquid soap dispensers.
Foam soap dispensers handle foam soaps
from 0-14 centipose (cps).
1. Remove lid (as described previously).
2. Fill with appropriate soap and replace lid.
3. Priming the dispenser will take 6-10 strokes.
DISCLAIMER: Inappropriate soap use may result
in ineffective dispenser operation or clogging.
Soap containing any type of scrubbers will
cause the dispenser to leak or eventually fail.
Figure 5 Figure 6
π
CHICAGO • ATLANTA • DALLAS • LOS ANGELES • MINNEAPOLIS • NYC/PHILA • SEATTLE • MEXICO • CANADA
1-800-295-5510
uline.com
To Previous Page
Loading...
Need help?
General
