PAGE 5 OF 23 1120 IH-8367
ASSEMBLY CONTINUED
18. Position loose cords underneath the cable
management trays (9). Attach the cable
management trays to the adjustable table frame (3)
and adjustable return frame (4) using twelve M6 x 15
mm machine screws (12) and 4 mm hex wrench (16).
(See Figure 12)
19. Desk is now fully assembled. Using two people,
carefully flip the desk onto the feet.
20. Plug power cord into outlet. Follow operation
instructions to initialize the desk prior to first use.
Figure 12
9
12
To Next Page
