U-Line DOWNTOWN H-7759 User Manual

PAGE 1 OF 6 0821 IH-7759
1-800-295-5510
uline.com
DOWNTOWN COLLECTION –
MOBILE PEDESTAL FILE
H-7759, H-8953
NOTE: Assemble unit on a smooth, non-marring
surface to prevent scratching.
NOTE: Check that all parts are included.
1. Lock drawers using key. Lay pedestal file onto back
and locate pre-drilled holes on the front of bottom
panel. Align holes on locking caster (A) bracket and
attach using four M4 x 16 mm screws (E). Repeat for
second locking caster. (See Figure 1)
2. Locate pre-drilled holes on back of bottom panel
and align with holes on caster (B) bracket. Attach
using four M4 x 16 mm screws (E). Repeat for second
caster. (See Figure 1)
TOOL INCLUDED
Wrench
PARTS
ASSEMBLY
Figure 1
Locking Caster x 2
A
B C E F
Screw x 18
M4 x 16 mm
Caster x 2
File Clip x 2
Drawer Caster x 1
TOOLS NEEDED
Phillips
Screwdriver
Two Person Assembly
Recommended
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
A
B
A
B
E
E
G
H
I
Metal Bar x 1
Keys (Set of 2) x 1
Handle x 2
(3 for H-8953)
Screw x 4
M4 x 22 mm
(6 for H-8953)

U-Line DOWNTOWN H-7759 Specifications

General

Model	H-7759
Brand	U-Line
Capacity	5.0 Cu. Ft.
Energy Source	Electric
Voltage	115 V
Installation	Freestanding
Door Swing	Right
Temperature Range	34°F - 65°F
Control Type	Digital
Lighting	LED

Summary

Parts Identification

Locking Caster

Identifies the locking casters included for securing the pedestal.

Standard Caster

Identifies the standard casters for the pedestal's mobility.

Drawer Caster

Identifies the specific caster for the drawer.

M4 x 16 mm Screws

Small screws used for attaching components like casters.

File Clip

Clips used for organizing files within the pedestal.

Metal Bar

A metal bar included for structural or functional purposes.

Drawer Handle

Handles for the pedestal drawers.

M4 x 22 mm Screws

Longer screws for specific assembly points.

Keys

Keys provided for the locking mechanism of the pedestal.

Assembly Instructions

Attaching Locking Casters

Step-by-step guide to attaching the two locking casters to the bottom panel.

Attaching Standard Casters

Step-by-step guide to attaching the two standard casters to the bottom panel.

Attaching Drawer Caster

Instructions for attaching the drawer caster using a wrench.

Installing Drawer Handles and Accessories

Procedure for moving handles, attaching file clips, and inserting the metal bar.