U-Line MINI PAK'R H-1604 User Manual

PAGE 5 OF 7 0715 IH-1604
AIR CONTROL
Regulates the amount of air in the Air Cushions.
(See Figure 13)
• For fuller cushions, press the "+" Button.
• For less full cushions, press the "–" Button.
NOTE: Air Cushions are designed to be inflated
around 2/3 full. This allows pillows to absorb
shock of impacts during the shipping cycle.
TEMPERATURE CONTROL
Regulates the temperature of the Seal Bar. (See Figure 14)
• To increase the sealing temperature, press the "+"
Button.
• To decrease the sealing temperature, press the "–"
Button.
NOTE: When the temperature setting is
changed, the Mini Pak'r™ may take a few
moments to raise or lower the temperature. The
green LED flashes during heat-up or cool-down
until the correct temperature is reached.
If Air Cushions continue to have leaking or burned
through seals, contact Uline customer service at
1-800-295-5510.
START
MINI PAK˙R
™
FP International
air cushion machine
(877) 594-5160
www.fpintl.com
STOP/RESET
Figure 14
START
MINI PAK˙R
™
FP International
air cushion machine
(877) 594-5160
www.fpintl.com
STOP/RESET
Figure 13
CHANGING MINI PAK’R™ SETTINGS CONTINUED

U-Line MINI PAK'R H-1604 Specifications

General

Brand	U-Line
Model	MINI PAK'R H-1604
Category	Kitchen Appliances
Language	English