U-Line RUBBERMAID 4040 User Manual

PAGE 1 OF 9 0421 IH-479
RUBBERMAID
®
DIGITAL SCALES
1-800-295-5510
uline.com
H-479, H-480
SETUP
OPERATION
POWER SUPPLY
BATTERY USE: Battery compartment is located on
underside of the display indicator back. Connect
battery poles accordingly.
ADAPTER USE: First, plug into bottom right of display
indicator. Then, plug into wall outlet.
NOTE: When using the AC adapter, if display
fluctuates between "----" and numbers, reverse
adapter in wall outlet.
DISPLAY INDICATOR MOUNTING
The display indicator can be mounted to a wall up to
9 feet from the base.
1. Drill two holes 1⁄" apart. (See Figure 1)
2. Screw the two screws into the wall, letting the heads
protrude 1/8" from the wall. Extending the screw
heads further could damage the scale.
3. Align the holes on the back of the indicator with
the screws. The indicator should slide on the screws,
firmly and securely.
TURNING SCALE ON/OFF
1. Press the ON button to turn the scale on. Proceed
with weighing the items once 0.0 lb. appears on
display. (See Figure 2)
NOTE: Always wait for display to return to zero
before weighing new items.
2. Press the OFF button to turn the scale off.
CHANGE UNITS OF MEASURE
1. Press the lb./kg. button to switch between lb. and kg.
(See Figure 3)
ZERO
1. Press the ZERO button to return the scale to 0.0.
(See Figure 4)
HOLD
Keeps current product weight on display after product is
removed.
1. Press the ZERO button for 3 seconds to activate
"Hold." Press the ZERO button for another 3 seconds
to deactivate "Hold."
Figure 4
0.0
lb.
kg.
4.0
lb.
kg.
ZERO/
HOLD
Push Button Display goes to Display goes to
Add net
weight
0.0
lb.
kg.
lb.
kg.
0.0
lb.
kg.
Push Button Display goes to
Para Español, vea páginas 4-6.
Pour le français, consulter les pages 7-9.
4010/
4040
0.0
lb.
kg.
ON
Push Button Display goes to Display goes to
Figure 2
Figure 3
Drill Hole
Drill Hole
Figure 1

U-Line RUBBERMAID 4040 Specifications

General

Brand	U-Line
Model	RUBBERMAID 4040
Category	Scales
Language	English

Summary

Scale Setup and Operation

Power Supply

Details battery and AC adapter usage, including troubleshooting for display fluctuations.

Display Indicator Mounting

Instructions for wall mounting the display indicator up to 9 feet from the scale base.

Turning Scale On/Off

Steps to power the scale on and off, noting to wait for zero before weighing.

Zero and Hold Functions

How to use the ZERO button to reset the scale and the HOLD function to retain weight readings.

Change Units of Measure

Instructions for switching between pounds (lb.) and kilograms (kg) using the dedicated button.

Scale Operation, Auto Shut-Off, and Calibration

Tare Function

Process for zeroing out container weight or added items using the ZERO button.

Auto Shut-Off

Details automatic scale turn-off and how to cancel or reactivate this feature.

Scale Calibration

Step-by-step guide for calibrating the scale using specific button presses and weights.

Maintenance and Troubleshooting

Care and Cleaning

Guidelines for protecting the scale from damage and proper cleaning methods.

Troubleshooting Common Issues

Recommended solutions for operating issues like no display, inaccurate weights, or low battery.

Technical Specifications

Model, Capacity, and Accuracy

Lists ULINE/Rubbermaid model numbers, capacities, and resolution/accuracy for each scale.

Power, Units, and Dimensions

Details power sources, weighing units, platform size, and display indicator size.