AV-30 Quick Reference Card
Attitude Indicator Mode
Basic Data
▪ Blank
▪ DG Heading
▪ IAS
▪ Altitude
▪ Baro Set
▪ AoA
▪ Vertical Speed
▪ G Load
▪ Bus Volts
▪ Set Altitude
If Temp Probe
▪ OAT
▪ TAS
▪ DALT
If GPS Connected
▪ Waypoint ID
▪ Distance To
▪ Ground Speed
▪ Track
▪ XTE
▪ DTRK
▪ Bearing To
▪ Nav Mode
If AV-HSI Connected
▪ OBS
If Autopilot Connected
▪ Set Vertical Speed Bug
(overlaid on Vertical
Speed)
▪ Autopilot Mode
If BeaconX connected
▪ Squawk
If AV-Link+Sentry connected
▪ CO – Carbon Monoxide
UI Style
UI Font
Course Deviation
Glideslope
Alert Volume
AoA Alert Enable
AoA Alert Thresholds
1
G Alert Enable
G Alert Thresholds
Roll Alert Enable
Roll Alert Thresholds
GPS Track Stabilization
HOURS
Push left button 2x
SETUP
ROT TO SEL
2
Not all values can be placed in
every field (IAS, Altitude and Baro
Setting only allowed in certain
fields). Some values are
implemented with graphical
indicators, other with textual
fields.
Push left button 1x
EDIT FIELDS
SEL FIELD
1
AoA limits will be grayed out
unless rotary knob is pushed
while applying power.
PUSH-SET Menu:
Push to cycle through options and rotate to change option
Close by cycling to end, pressing left button, or waiting 30
seconds
Options:
• SET BARO
• DG ADJ
• HDG BUG Hold button down to align with current
heading
• OBS (with AV-HSI only)
• SRC SEL (with AV-HSI only)
• SET ALT (with Autopilot or SALT overlay only)
• SET VS (with Autopilot only)
• AUTOPILOT (with Autopilot only)
• SQUAWK (with tailBeaconX only)
Change Modes:
If Function unlocked, long hold button to change to DG
mode.
Select Current Page
Three Customizable Pages 1:3, 2:3, 3:3, AI
AI - Decluttered Attitude Indicator/Transponder Control
Push RIGHT button to change page
Hold RIGHT button for brightness setting
Battery
State
FOR REFERENCE ONLY
EDIT FIELDS MENU
Highlighted In Black.
7 editable fields per page,
26 possible values
2
SETUP MENU
www.uavionix.com/support
Support: (844) 827
-2372
UAV-1005760-001 Rev E
To Next Page
Need help?
General
