Auto
Exhaust
Mode
Auto
Echappement
Exhaust
Mode
Auto
Echappement
TO SELECT THE
OPERATING MODE:
To choose operating mode, press the Mode
button. Each time you press the button, a mode
is selected in a sequence that goes from Auto,
Cool, Dry and Fan. The indicator light beside
mode is selected.
NOTE:
TO USE THE ENERGY
SAVER FEATURE:
NOTE:
NOTE:
Press the Mode
button.
DO THIS:
Press the button
DO THIS:
Press Sleep
button
DO THIS:
This function is available on COOL mode.The
fan will continue to run for 3 minutes after the
compressor shuts off.The fan then cycles on
for 2 minutes at 10 minute intervals until the
room temperature is above the set temperature,
at which time the compressor turns back on
To operate on Auto feature:
In this mode, the fan speed cannot be adjusted,
it starts automatically at a speed according to the
room temperature.
To operate on Fan Only:
Use this function only when cooling is not desired,
such as for room air circulation or to exhaust stale
vent during this function, but keep it closed during
choose any fan speed you prefer.
During this function, the display will show the
actual room temperature, not the set temperature
as in the cooling mode.
To operate on Dry mode:
in the form of a dehumidifier. Since the
some degree of cooling will continue.
When you set the air conditioner in AUTO mode, it
temperature.
The air conditioner will control room temperature
automatically round the temperature point set by you.
In Fan only mode,the temperature is not adjusted.
In this mode the selected temperature will
OO
mode is selected.The temperature will then
increase by another after an
additional 30 minutes. This new temperature will
be maintained for 6 hours before it returns to the
originally selected temperature. This ends the
Sleep mode and the unit will continue to operate
as originally programmed. The Sleep mode
program can be cancelled at any time during
operation by again pressing the Sleep button.
7
will be illuminated and will remain on once the
AIR CONDITIONER FEATURES (CONTINUED)
what temperature you have selected and the room
will automatically select cooling, heating(on some
models only), or fan only operation depending on
air(on some models). Remember to open the
cooling for maximum cooling efficiency. You can
In this mode, the air conditioner will operate
and Cooling starts.
increase by 1 C(2 F) 30 minutes after the
OO
1 C(2 F)
SLEEP FEATURE:
conditioned space is a closed or sealed area,
the
To Next Page
Loading...
