Ubiquiti AMPLIFI - Set Up AmpliFi Mesh System; Set Up AmpliFi Standalone MeshPoint

8
Chapter 3: Using the App for Installation AmpliFi User Guide
3. When the Welcome screen appears, you will see three
options:
• Set Up AmpliFi Mesh System
• Set Up AmpliFi Standalone MeshPoint
• I already have a configured AmpliFi
Proceed to the section below that corresponds with your
selection.
Set Up AmpliFi Mesh System
This option allows you to set up and configure a new
AmpliFi Router. Tap Set Up AmpliFi Mesh System and
repeat steps 3-8 from ”Router Installation” on page5.
Set Up AmpliFi Standalone MeshPoint
This option allows you to set up a standalone MeshPoint and
add it to an existing Wi-Fi network.
1. Select the device that needs to be configured (if more
than one MeshPoint is being installed).