Need help?Do you have a question about the Ubiquiti UAP-AC-M-PRO and is the answer not in the manual?
Specifies the required UniFi Controller version and download link.
Describes network prerequisites like DHCP and UniFi Controller.
Steps for preparing the mounting bracket and pole clamps.
Steps for securing the UniFi AP to the installed pole mounting bracket.
Steps for attaching the mounting bracket to a wall stud.
Details connecting the AP to the PoE adapter and power outlet.
Explains connecting the AP directly to a PoE switch.
Guide to downloading, installing, and logging into UniFi Controller.
Covers general warnings and electrical safety guidelines for the device.
General| Model | UAP-AC-M-PRO |
|---|---|
| Category | Wireless Access Point |
| Wireless Standards | 802.11 a/b/g/n/ac |
| Frequency Bands | 2.4 GHz, 5 GHz |
| Mounting | Wall, Pole |
| Weatherproof | Yes |
| Max. Power Consumption | 9W |
| BSSID | Up to 4 per Radio |
| Operating Humidity | 5 to 95% Noncondensing |
| Certifications | CE, FCC, IC |
| Power Method | 802.3af PoE |
| Weight | 633 g |
| Antennas | Dual-band omni-directional |
| Wireless Security | WEP, WPA |
| Max. TX Power | 22 dBm |
| Operating Temperature | -30 to 70° C |
| Data Rate | 1300 Mbps (5 GHz), 450 Mbps (2.4 GHz) |
| MIMO | 3x3 (5 GHz) |
| Management | UniFi Controller |
| Maximum Data Rate | 1300 Mbps (5 GHz), 450 Mbps (2.4 GHz) |
To Next Page