Need help?Do you have a question about the Ubiquiti UAP-AC-PRO and is the answer not in the manual?
General| Wireless Standards | 802.11 a/b/g/n/ac |
|---|---|
| Max Data Rate | 1300 Mbps (5 GHz), 450 Mbps (2.4 GHz) |
| Frequency Bands | 2.4 GHz, 5 GHz |
| Antenna Gain | 3 dBi (2.4 GHz), 3 dBi (5 GHz) |
| Wireless Security | WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
| Max. Power Consumption | 9 W |
| BSSID | Up to 8 per Radio |
| Power Save | Supported |
| Wireless Uplink | Supported |
| Concurrent Clients | 200+ |
| Operating Humidity | 5 to 95% Noncondensing |
| Certifications | CE, FCC, IC |
| VLAN | 802.1Q |
| Advanced QoS | Per-User Rate Limiting |
| Guest Traffic Isolation | Supported |
| Mounting | Wall/Ceiling |
| Ports | 2 x 10/100/1000 Ethernet Ports |
| PoE | 802.3af/802.3at |
| Weight | 350 g |
| Weight With Mounting Kits | 450 g |
| Networking Interface | 2 x 10/100/1000 Ethernet Ports |
| Antennas | 3 Dual-Band Antennas, 3 dBi each |
| Supported Voltage Range | 44-57V DC |
| Max. TX Power | 22 dBm |
| Operating Temperature | -10 to 70° C |
| WMM | Supported |
| Data Rates | 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11b: 1, 2, 5.5, 11 Mbps 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11n: 6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40) 802.11ac: 6.5 Mbps to 1300 Mbps (MCS0 - MCS9 NSS1/2/3, VHT 20/40/80) |
| MIMO | 3x3 |
Outlines necessary software, OS, and network configurations for setup.
Specifies conditions and precautions for mounting the device outdoors.
Describes how to restart or reset the device using the reset button.
Step-by-step process for securing the AP to a wall.
Step-by-step process for installing the AP on a ceiling tile.
To Next Page