Need help?Do you have a question about the Ubiquiti UAP-AC-LITE and is the answer not in the manual?
General| Wireless Standards | 802.11 a/b/g/n/ac |
|---|---|
| Antenna Gain | 3 dBi |
| Operating Temperature | -10 to 70° C (14 to 158° F) |
| Operating Humidity | 5 to 95% Noncondensing |
| Max. Power Consumption | 6.5W |
| BSSID | Up to 4 per Radio |
| Certifications | CE, FCC, IC |
| Data Rates | 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11b: 1, 2, 5.5, 11 Mbps 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11n: 6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40) 802.11ac: 6.5 Mbps to 867 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80) |
| Wireless Frequency | 2.4 GHz, 5 GHz |
| Management | UniFi Controller |
| Ports | 1 x 10/100/1000 Ethernet |
| Dimensions | 160 x 160 x 31.45 mm |
| Weight | 170 g (6 oz) |
| Wireless Security | WEP, WPA |
| Max. TX Power | 20 dBm |
| MIMO | 2x2 |
| Mounting | Wall/Ceiling |
| Max Data Rate | 867 Mbps (5 GHz) / 300 Mbps (2.4 GHz) |
| Power Method | 802.3af/A PoE; 24V Passive PoE (Pairs 4, 5+; 7, 8 Return) |
Explains the meaning of different LED colors and patterns on the UniFi AP.
Details the two functions of the reset button: restart and factory reset.
Steps for positioning the mounting bracket and marking holes on the wall.
Guides on inserting screw anchors and fastening the bracket to the wall with screws.
Step for connecting the Ethernet cable to the UniFi AP's port.
How to align the AP's arrow with the mounting bracket and its locking tab.
Ensures the AP is seated firmly and locked into place by turning clockwise.
Step for connecting the Ethernet cable to the UniFi AP's port.
Ensures the AP is seated firmly and locked into place by turning clockwise.
Connects AP, LAN, and power cord to the Gigabit PoE adapter.
Details electrical safety requirements, precautions, and grounding for the device.
To Next Page