Ubiquiti EdgeRouter 6P User Manual

Using SFP Ports
To use an SFP port:
1. Remove the protective plug covering the SFP port.
2. Plug a fiber SFP module into the SFP port.
1000Mbps SM/SC 20KM DDM
Tx1550nm/Rx1310nm
3. Connect a fiber optic cable to the fiber SFP module. Then
connect the other end of the cable to another fiber device.
For information about compatible fiber SFP modules, visit:
ubnt.link/SFP_DAC_Compatibility

Ubiquiti EdgeRouter 6P Specifications

General

Brand	Ubiquiti
Model	EdgeRouter 6P
Category	Network Router
Language	English