Ubiquiti ER-6P User Manual

6-Port Gigabit PoE Router
with 1 SFP Port
Model: ER-6P

Ubiquiti ER-6P Specifications

General

Brand	Ubiquiti
Model	ER-6P
Category	Network Router
Language	English

Summary

Hardware Overview

Front Panel Ports Identification

Front Panel Button

Reset Button Operation

Explains the two methods (runtime and power-on) to reset the EdgeRouter to factory defaults.

Front Panel LEDs

System LED Status Indicators

RJ45 and SFP LED Indicators

RJ45 Port LED Status

SFP Port LED Status

Hardware Installation

Wall Mounting Procedure

Provides step-by-step instructions and dimensions for mounting the EdgeRouter on a wall.

ESD Grounding and Cable Management

Connecting Power

Power Adapter and Cord Connection

Illustrates the steps to connect the power adapter, power cord, and plug into a power outlet.

Using SFP Ports

SFP Module Installation Guide

Guides on removing the plug, inserting an SFP module, and connecting a fiber optic cable.

Accessing the EdgeOS Configuration Interface

DHCP Configuration Method

Explains how to connect via DHCP, including checking the assigned IP address.

Login Screen and License Agreement

Static IP Address Configuration

Static IP Setup Steps

Outlines steps for static IP configuration, including host IP setup and interface access.

Configuring PoE Settings

Enabling PoE on Ethernet Ports

Describes how to enable or disable PoE for specific Ethernet ports via the interface.

PoE LED Confirmation

Specifications

Device Technical Specifications

PoE 24VDC Adapter Specifications

Safety Notices

General Safety Warnings

Provides safety instructions regarding ventilation, rain, water submersion, and electrical storms.

Electrical Safety Information

Grounding, Service, and Bonding

Covers electrical compliance, serviceability, power cord usage, grounding, and protective bonding.