To Next PageTo Next Page
Need help?Do you have a question about the Ubiquiti ER-12 and is the answer not in the manual?
General| Product Line | EdgeRouter |
|---|---|
| Model | ER-12 |
| Number of Ports | 12 |
| SFP Ports | 2 |
| Power Method | AC |
| Power Input | 100-240VAC |
| Supported Voltage Range | 100-240VAC |
| Code Storage | 4 GB eMMC |
| Operating Humidity | 10 to 90% non-condensing |
| Certifications | CE, FCC, IC |
| Router Type | Router |
| Ethernet Ports | 10 |
| Firewall Throughput | 2.5 Gbps |
| System Memory | 1 GB |
| Layer 3 Forwarding Performance | 2.5 Mpps |
| Operating Temperature | -5 to 45°C (23 to 113°F) |
Lists necessary tools for optional wall mounting.
Specifies UTP and shielded cabling for indoor/outdoor use.
Recommends ESD protection and outdoor housing for the device.
Explains the status indications of the System LED.
Details the meaning of LEDs for RJ45 ports 0-9.
Describes the status of the PoE LED.
Explains the status indications for SFP ports 10-11.
Describes the console port and RJ45 ports for management.
Explains SFP port capabilities and compatibility.
Explains how to reset the EdgeRouter to factory defaults.
Steps for attaching ground screw and wire for ESD protection.
Instructions for connecting the power adapter and securing the cable.
Step-by-step guide to access the configuration interface via DHCP.
Methods to verify the IP address assigned by the DHCP server.
Instructions for launching the browser, entering the IP, and logging in.
Connecting the computer to the EdgeRouter's eth0 port for static configuration.
Configuring the host system's Ethernet adapter with a static IP.
Launching the browser and accessing the interface using the static IP address.
Logging into the EdgeOS interface via the static IP address.
General instructions for reading, following, and using accessories.
Warning about fire hazard due to inadequate ventilation and clearance.
Warnings against exposure to rain, moisture, or submersion.
Warning against using the product during electrical storms due to lightning risk.
Compliance with voltage, frequency, current, and proper connection methods.
Equipment service should only be performed by qualified technicians.
Proper usage of power cords, grounding wires, and professional installation.
Details FCC compliance statements and operational conditions.
States compliance with ISED Canada regulations.
States compliance with Class A of CISPR 32 for Australia/New Zealand.
Explains CE marking indicates compliance with applicable directives.
