Ubiquiti EdgeRouter 6P User Manual

Configuring PoE Settings
The PoE setting for ports eth0-eth4 is set to Off by default.
WARNING: Before activating PoE, ensure that the
connected device supports passive PoE and the
supplied voltage.
1. In the Dashboard tab, click Actions > PoE of the Ethernet
port you want to configure.
2. The Interface Configuration window will appear. Select the
appropriate PoE setting, and click Save.

Ubiquiti EdgeRouter 6P Specifications

General

Brand	Ubiquiti
Model	EdgeRouter 6P
Category	Network Router
Language	English