Ubiquiti edgerouter X SFP - Configuring PoE Settings; Enabling 24 V Passive PoE

Configuring PoE Settings
WARNING: Before activating 24V passive PoE, ensure
that the connected device supports PoE and the
suppliedvoltage.
1. On the Dashboard screen, go to Actions > PoE for the
interface you want to configure.
2. Select 24V from the PoE drop-down menu.
3. ClickSave.
For more information, refer to the EdgeOS User Guide, which is
available at documentation.ubnt.com/edgemax
*640-00150-02*
640-00150-02