Installation Requirements
● Clear view of the sky for proper GPS operation
● 7 mm socket wrench or screwdriver
● Shielded Category 5 (or above) cabling should be used for all wired
Ethernet connections and should be grounded through the AC ground
of the PoE.
We recommend that you protect your networks from harmful outdoor
environments and destructive ESD events with industrial-grade,
shielded Ethernet cable from Ubiquiti. For more details, visit
ui.com/toughcable
● Surge protection should be used for all outdoor installations. We
recommend that you use two Ethernet Surge Protectors, model
ETH-SP, one near the LiteAP and the other at the entry point to the
building. The ETH-SP will absorb power surges and safely discharge
them into the ground.
To Next Page
Loading...
