Ubiquiti LAP-GPS User Manual

The Ethernet LED will light steady blue when an active Ethernet connection
is made and flash when there is activity.
GPS LED
The GPS LED will light steady blue when there is a strong GPS signal.
Reset Button
To reset to factory defaults, press and hold the Reset button for more than
10 seconds while the device is powered on. Alternatively, the device may
be reset remotely via a Reset button located on the bottom of the Gigabit
PoE Adapter.

Ubiquiti LAP-GPS Specifications

General

Brand	Ubiquiti
Model	LAP-GPS
Category	Wireless Access Point
Language	English