To Next PageTo Next Page
Need help?Do you have a question about the Ubiquiti LiteBeam LBE-5AC-LR and is the answer not in the manual?
General| Product Name | LiteBeam LBE-5AC-LR |
|---|---|
| Category | Wireless Access Point |
| Frequency Band | 5 GHz |
| Max Throughput | 450+ Mbps |
| Antenna Gain | 23 dBi |
| Power Supply | 24V, 0.5A Gigabit PoE Adapter |
| Wireless Standards | 802.11ac |
| Operating Modes | Access Point, Station |
| Operating Temperature | -40 to 70° C (-40 to 158° F) |
| Wind Survivability | 200 km/h (125 mph) |
| Wireless Approvals | FCC, IC, CE |
| Gain | 23 dBi |
| Max. VSWR | 1.5:1 |
| Polarization | Dual Linear |
| Power Method | Passive PoE |
| Networking Interface | 10/100/1000 Ethernet |
| Processor | MIPS 74Kc |
| Memory | 64 MB |
| Mounting | Pole Mount |
| Operating Humidity | 5 to 95% non-condensing |
| ESD/EMP Protection | ± 24 kV Contact / Air |
| Enclosure | UV-resistant plastic |
| LEDs | Power, Ethernet |
LED indicates Ethernet connection status: solid blue for connected, blinking for activity.
LED indicates power status: lights blue when connected to a power source.
Restore factory defaults by holding the button for over 10 seconds or remotely via PoE adapter.
Supports 10/100/1000, passive PoE, and connects to LAN/DHCP server.
Steps for accessing the device configuration via a web portal.
Explanation of how cable loss affects output power.
Lists FCC/ISED Canada approved antenna types and maximum gain.
Specific electrical safety precautions and grounding requirements.
Information on product warranty and support.
Details FCC and ISED Canada compliance statements, rules, and operational conditions.
Provides information on radiation exposure limits and required installation distance.
Compliance notes for Australia, New Zealand, Brazil, and CE marking, including country lists.
Statements on WEEE compliance and product conformity declarations.
