Need help?Do you have a question about the Ubiquiti Nano G and is the answer not in the manual?
Explains how the display shows download (RX) and upload (TX) speeds in Mbps.
Explains how the display shows RX and TX power levels in dBm for the PON connection.
Step-by-step guide for mounting the device to a wall using the bracket.
Describes the final step of attaching the Nano G unit to the wall mount bracket.
General| Product Type | Wireless Access Point |
|---|---|
| Product Name | Ubiquiti Nano G |
| Category | Network Hardware |
| Frequency Band | 2.4 GHz |
| Max Data Rate | 150 Mbps |
| Antenna Gain | 8 dBi |
| Power Supply | 24V Passive PoE |
| Power Method | Passive PoE |
| Operating Humidity | 5 to 95% non-condensing |
| Certifications | CE, FCC, IC |
| Wireless Standards | 802.11g |
| Enclosure Characteristics | Outdoor |
| Processor Specs | MIPS 24Kc |
| Networking Interface | 1 x 10/100 Ethernet |
| Operating Temperature | -30 to 70 °C |
To Next Page