Do you have a question about the Ubiquiti UniFi UAP-IW and is the answer not in the manual?
Frequency Bands | 2.4 GHz, 5 GHz |
---|---|
Power Method | 802.3af PoE |
Supported Voltage Range | 44-57VDC |
VLAN | 802.1Q |
Advanced QoS | Yes |
Guest Traffic Isolation | Yes |
Concurrent Clients | 100+ |
Buttons | Reset |
Type | Indoor Access Point |
Networking Interface | 1 × Gigabit Ethernet |
Ports | 1 × Gigabit Ethernet |
Max. TX Power | 20 dBm |
Antennas | Internal |
Wireless Security | WPA, WPA2 |
BSSID | Yes |
Mounting | Wall |
Operating Humidity | 5 to 95% Noncondensing |
WMM | Yes |
Supported Data Rates | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
MIMO | 2x2 |
Model | UniFi UAP-IW |