NEO-8Q / NEO-M8 - Hardware integration manual
UBX-15029985 - Production information Revision history Page 30 of 31
C1-Public
Revision history
Revision Date Name Comments
R01 28-Jan-2016 jfur Advance Information
R02 17-May-2016 jfur
Pin name updated (Table 2 and Table 4, section 1.5.2, section 1.5.5 and section
1.5.7), added NEO-M8M, NEO-M8Q, NEO-M8T and NEO-8Q variants.
R03 08-Aug-2016 jfur Production Information
R04 11-Nov-2017 msul
Added Information on RED DoC in the European Union regulatory compliance
section (page 2); added Intended use case for EMI in section 4.3 EOS/ESD/EMI
precautions; updated legal statement on the cover page and added
Documentation feedback e-mail address in contacts page.
R05 10-Jul-2019 jesk
Clarified use of internal pull-ups in section 1.5. Clarified alternative uses for the
EXTINT pin in section 1.5.2. Updated parameters for the recommended inductor in
appendix B.
R06 24-Jan-2020 rmak Updated section 3.2 Hardware migration (NEO-M8M supply voltage)
R07 26-May-2020 msul
Updated type number and PCN reference for NEO-M8N, NEO-M8Q, NEO-M8T, and
NEO-8Q in page 2, added thermal management statement in section 2.5.
R08 05-May-2021 oola
Added NEO-M8J variant information, updated NEO-M8M type number and PCN
reference on page 2.
To Next Page
Loading...
Need help?
General
