Ublox MAX-7C-0 User Manual

MAX-7 / NEO-7
u-blox 7 GNSS modules
Hardware Integration Manual
Abstract
This document describes the features and specifications of the cost
effective and high-performance MAX-7 and NEO-7
GPS/GLONASS/QZSS modules featuring the u-blox 7 positioning
engine.
These compact, easy to integrate stand-alone GNSS receiver
modules combine exceptional GNSS performance with highly
flexible power, design, and connectivity options. Their compact
form factors and SMT pads allow fully automated assembly with
standard pick & place and reflow soldering equipment for cost-
efficient, high-volume production enabling short time-to-market.
www.u-blox.com
UBX-13003704 - R09

Ublox MAX-7C-0 Specifications

General

Velocity Accuracy	0.1 m/s
Reacquisition	1 s
Max Velocity	500 m/s
Operating Voltage	2.7 V to 3.6 V
Update Rate	Up to 10 Hz
Type	GPS
Frequency	L1, 1575.42 MHz
Position Accuracy	2.5 m
Max Altitude	50000 m
Operating Temperature	-40°C to 85°C
Protocols	NMEA, UBX, RTCM
Interface	UART, USB, DDC