MAX-7 / NEO-7 - Hardware Integration Manual
UBX-13003704 - R09 Production Information Design
Page 32 of 52
3.5 Recommended parts
u-blox has tested and recommends the parts listed in Table 8. Other untested components may also be used.
Standoff voltage > voltage for active
antenna
For automotive application
ESD protected and high input power
Low insertion loss, only for mobile
application
High attenuation, only for mobile
application
High attenuation, only for mobile
application
Low insertion loss, Only for mobile
application
Compliant to the AEC-Q200 standard
Ceramic filter also offers robust ESD
protection
Filter + LNA + FBAR Filter
Module, for GPS only, also including
FBAR filter in front of LNA
Module, for GPS only, FBAR filter-LNA
filter FBAR
Low noise figure, up to 10 dBm RF
input power
Low noise figure, up to 15 dBm RF
input power
Impedance @ freq GPS > 500
Feed thru
Capacitor
for Signal
For data signals, 34 pF load capacitance
For data signals, 4 circuits in 1 package
Table 8: Recommended parts
To Next Page
Loading...
Need help?
General
