Ublox SAM-M10Q - Page 8

SAM-M10Q-Integration manual
Pin no. Name PIO no. I/O Description
14 RXD 0 I UART RX
15 GND - - Connect to GND
16 GND - - Connect to GND
17 VCC - I Main voltage supply
18 RESET_N - I System reset (active low). Has to be low for at least 1 ms to trigger a
reset.
19 EXTINT 5 I External interrupt
20 GND - - Connect to GND
Table 1: SAM-M10Q pin assignment
UBX-22020019 - R01

1 System description Page 8 of 72
C1-Public