SARA-R4 series - System integration manual
UBX-16029218 - R20 System description Page 17 of 128
C1-Public
1.8 V GPIO with alternatively configurable functions.
See section 1.11 for functional description.
See section 2.8 for external circuit design-in.
1.8 V GPIO with alternatively configurable functions.
See section 1.11 for functional description.
See section 2.8 for external circuit design-in.
1.8 V GPIO with alternatively configurable functions.
See section 1.11 for functional description.
See section 2.8 for external circuit design-in.
1.8 V GPIO with alternatively configurable functions.
See section 1.11 for functional description.
See section 2.8 for external circuit design-in.
1.8 V GPIO with alternatively configurable functions.
See section 1.11 for functional description.
See section 2.8 for external circuit design-in.
1.8 V GPIO with alternatively configurable functions.
See section 1.11 for functional description.
See section 2.8 for external circuit design-in.
GNSS UART data output from internal u-blox M8 chipset.
Test-Point for diagnostic access is recommended.
See section 1.12 for functional description.
GNSS external interrupt connected to u-blox M8 chipset.
See section 1.12 for functional description.
GNSS time pulse output driven by u-blox M8 chipset.
See section 1.12 for functional description.
External GNSS active antenna and/or LNA on/off signal driven
by u-blox M8 chipset, connected to internal LNA.
See section 1.12 for functional description.
Internally not connected.
See sections 1.13 and 2.10
Internally not connected.
See sections 1.13 and 2.10
Internally not connected.
See sections 1.13 and 2.10
Leave unconnected.
See sections 1.13 and 2.10
Internally not connected.
See sections 1.13 and 2.10
Table 3: SARA-R4 series modules pin definition, grouped by function
SARA-R422M8S modules only
SARA-R410M, SARA-R412M modules only
SARA-R410M, SARA-R412M, SARA-R422, SARA-R422S modules only
SARA-R422, SARA-R422S, SARA-R422M8S modules only
SARA-R422, SARA-R422S modules only