Ublox SARA-R42 - Page 54

SARA-R42 - Application note
UBX-20050829 - R02 Migration guide from SARA-R410M / SARA-R412M and hints Page 54 of 58
C1-Public
Command or
feature
SARA-R422 / SARA-R422S /
SARA-R422M8S
SARA-R412M-02B-03
SARA-R410M-63B /
SARA-R410M-73B /
SARA-R410M-83B
SARA-R410M-02B-03
reapplied with UMNOPROF set
command.
command and set back to the
current value.
changed via +UMNOPROF set
command and set back to the
current value.
command and set back to the
current value.
+UBANDMASK
(options)
(0-2),18446744073709551615,
18446744073709551615
(0-1),0xffffffffffffffff,0xffffffffffffffff
(0-1),0xffffffffffffffff,0xffffffffffffffff
(0-1),0xffffffffffffffff,0xffffffffffffffff
+URAT (options)
7, 8, 9
7, 8, 9
7, 8
4
7, 8
<AcT> support in:
+COPS
+CREG
+CGREG
0, 3, 7, 9
0, 3, 7, 9
7, 9
7, 9
+COPS
<mode>=0 (automatic) in set
functionality does not reset the
selected RATs configuration
<mode>=0 (automatic) in set
functionality does reset the selected
RATs configuration
<mode>=0 (automatic) in set
functionality does reset the selected
RATs configuration
<mode>=0 (automatic) in set
functionality does reset the selected
RATs configuration
+CGACT
Always issue the AT+CGACT=1,<cid>
command on used context <cid> even
if the +CGDCONT AT command
returns that the context is still active
with a valid IP address. This is highly
recommended to activate the PS data
connection avoiding possible conflicts
between applications.
Optional
Optional
Optional
+UPSV (options)
0, 3, 4
0, 4
0, 4
0, 4
+UPSMVER
(options)
4, 8
1, 2, 4, 8
1, 2, 4, 8
1, 2, 4, 8
+UCGED (options)
0, 2
The option 5 is considered as a
redundant syntax: accordingly it has
been dropped.
0, 2, 5
0, 2, 5
0, 2, 5
SMS URCs with
MUX
Available
n.a.
n.a.
n.a.
ePCO disabling
+UCFGCIOT AT command
Suitable MNO profile 101
Suitable MNO profile 101 in
SARA-R410M-83B only
Suitable MNO profile 101
4
Not supported by SARA-R410M-63B and SARA-R410M-73B product versions