EN
18
Music Streaming Operations
To use the control unit with your music devices you must connect them
wirelessly through Bluetooth pairing. The music device must have Bluetooth
capability.
Pairing
• To connect the control unit a Bluetooth music device, hold the Up and Down
buttons for 2 seconds. This puts the UCLEAR into pairing mode. The status
indicator will blink blue and red alternately.
• Next, put the Bluetooth music device into pairing mode. Both the control unit
and the music device should automatically pair together.
After pairing to a music device, you may use the UCLEAR to wirelessly listen
to music stored on the device.
In order to use the control unit to remotely control the music, the music device
must have Bluetooth Audio/Video Remote Control capability, AVRCP profile.
Play
• To play music, press the Answer button 2 times.
Stop
• To stop music, press the Answer button 1 time.
Fast Forward
• To skip to the next track, press the Up button 2 times.
Backtrack
• To skip to previous track, press the Down button 2 times.
To Next Page
Loading...
