Need help?Do you have a question about the Uctronics Raspberry Pi and is the answer not in the manual?
General| Brand | Uctronics |
|---|---|
| Model | Raspberry Pi |
| Category | Motherboard |
| Language | English |
Introduces the Raspberry Pi 3 Starter Kit as an easy way to learn computing.
Lists all components included in the Raspberry Pi 3 Starter Kit for setup and use.
Details the 16GB Micro SD card pre-loaded with the Raspbian operating system.
Specifications for the 5V 2.5A US power supply adapter with a USB 'A' connector.
Description of a 1.5m USB to Micro USB cable with an integrated ON/OFF power switch.
Details the features and specifications of the ABS protective case for Raspberry Pi.
Information on a 1.5m Gold Plated HDMI to HDMI cable supporting V1.4 features.
Describes the Raspberry Pi Heat Sink Kit, including three aluminum heat sinks with thermal adhesive.
Details the T Type 40pin GPIO Board for breaking out Raspberry Pi GPIO pins.
Specifications for a 20cm 2x20 flat ribbon-cable for connecting Raspberry Pi GPIO headers.
Description of a full-size solderless breadboard with 830 tie points and split power buses.
Details M/M and M/F jumper wires included in the kit, each 20cm long.
Information on RGB and single-color LEDs, including their materials and handling precautions.
Specifications and dimensions for standard, flat plunger type push button switches.
Explains resistor function, value notation, and color codes for 220 Ohm and 10K Ohm resistors.
Step-by-step instructions for initial Raspberry Pi setup and connecting peripherals.
Introduction to Raspbian, the official OS, and its pre-installed software for education and programming.
Instructions on how to connect the Raspberry Pi to a WiFi network using the menu bar icon.
To Next Page