www.uctronics.com
5
B. Power Supply Adapter Charger 5V 2.5A (US)
These have a standard USB ‘A’ connector for the output so you can power your Arduino,
Raspberry Pi, etc. through a USB cable. Any device that uses a USB cable for charging or
power can be powered with this supply.
Specification:
Input Voltage: AC100-240V 50/60Hz
Output: DC 5.0V 2500mA (2.5A)
Consistent fixed switching voltage
Internal Fuse for Extra Safety
Adapter plug type: US
To Next Page
Loading...