www.uctronics.com
10
G. T Type 40pin GPIO Board
T Type 40pin GPIO Board is a small board that connects to the 40-pin GPIO connector
on the Raspberry Pi and breaks the pins out to breadboard-friendly arrangement and
spacing.
It is in a fancy T-shape, which is not as compact, but is much easier to read the labels.
Specification:
Break out all those tasty power, GPIO, I2C and SPI pins from the 40-pin header onto a
solderless breadboard
This GPIO expansion board is in a fancy T-shape, which is not as compact, but is a little
easier to read the labels
Each order comes with a 40 pins ribbon cable and assembled T Type Plus GPIO Expansion
Board
To Next Page
Loading...