EN-16 EN-17
english
english
Operating the unitOperating the unit
C C
Measured results are automatically stored in the memory. The
average value is calculated from the last three measurements
taken.
11. Using the memory
To retrieve the data, press MEM with the device
switched off. The average value of the stored
Data retrieval
Figure 1
Press the Memory button again to display the
most recently measured values. These meas-
-
The stored data remain visible in the display
itself off.
delete individual measured values.
• Press the MEM key in the shut-off state to
get to the memory.
•
until the measured values are replaces by
been deleted.
Deleting data
Press the Memory button repeatedly to call up
further measured values.
The measured value display also alternates be-
tween showing the date and time of the meas-
urement.
The memory is not automatically deleted when the battery is
replaced. The saved readings are retained until they are deleted
manually.
To Next Page
Loading...
