Care and MaintenanCe
Cable WrappingCable Wrapping
Proper cable wrapping is key to increasing the longevity of your
headset. To properly wrap the cable, hold either end between
your thumb and ngers and gently create loose 4-inch (10cm)
diameter loops. As you create each loop, you will feel the cable
want to twist. Allow the cable to twist, following the natural ow
of the wires. A properly wrapped cable will lay at on a surface.
Caution: Do not wrap the cable around the palm of your
hand, this will destroy the cable internally, guaranteed!
StorageStorage
Store the HARMONY headset in a cool, dry location inside the
headphone case. The pocket in the lid of the case is made to
hold the assembled HARMONY. Do not store HARMONY in the
case attached to the headphones, this will damage the cable.
We recommend leaving the Microphone Boom and Headphone
Cable assembled for storage to minimize the potential for
damage. Disconnecting the Application Cable is optional.
warranty & repair
UFlyMike guarantees all of our products to be free of factory
defects for a period of two years. Warranty does not cover
failures due to normal wear and tear, misuse or abuse.
To arrange Warranty or Repair service, please contact us at:
(719) 531-7226
support@uymike.com
14
To Next Page
Loading...