UHPPOTE HBK-A01 - Set Super Open Code; Set Open Mode; Set Open Time; Advanced Application

Entry is by either Card or PIN
(Default)
Entry is by Card and PIN together
Entry is by PIN only
Entry is by Card only
XX is any number from 0 to 99.
The factory default setting is 3
seconds.
Advanced Application
Set open
mode
Set open
time
Support one set super open code
which can be used to open the door
in any open mode.
Set super
open code
#
Super Open Code
#
Repeat Super Open Code
0
1
2
3
XX
#
3
4
0000
#
Delete the super open code
#
#
#
#
5
XX
#
16
Set Multi-cards to open
XX is any number from 1 to 10.
The factory default setting is 1.
The door will opened when the quantity of
valid cards read.
Only for Card Only mode.
Alar m Setting
#
17
0
#1
OFF (Default)
ON
Set anti-tamper alarm
6
EN