Ulma MK Structure - Safety and Access Platforms

Construcción
ConstrucciónConstrucción
Construcción
42
MK
MK MK
MK STRUCTURE
STRUCTURESTRUCTURE
STRUCTURE
4.7.
4.7.4.7.
4.7. SAFETY AND ACCESS PLATFORMS
SAFETY AND ACCESS PLATFORMSSAFETY AND ACCESS PLATFORMS
SAFETY AND ACCESS PLATFORMS
Safety platforms are assembled directly on the
structures. This can be done in two ways:
 Directly on two adjoining structures with the
available walers. Secondary beams and board
rest on the walers. Depending on the beam used,
the corresponding fixing system is employed.
 Directly on the bracing tubes between structures
with metal scaffolding platforms on round or
square tubes.
Platforms can be installed at any point of the
structure to provide working areas at different levels
and thus assisting the assembly. Moreover, access
platforms provide access to higher areas if required.
The first option allows of installing cantilever
platforms, that is, platforms outside the structure.
Both options similarly serve to assemble platforms
inside the structure.
The safety handrail system can also be assembled in
two different ways:
 With Handrail Heads MK on secondary
beamsusing the appropriate handrails for each
case as in any other system.
 With Handrail Heads MK on walersassembling
the handrail heads directly onto the walers of the
structure. Tubes and couplers get fastened to the
head. Typically used with metal (scaffolding)
platforms, this option suits well any kind of
platform.
5.
5.5.
5.