Ulma MK Structure - Page 45

Construcción
ConstrucciónConstrucción
Construcción
45
MK
MK MK
MK STRUCTURE
STRUCTURESTRUCTURE
STRUCTURE
5.1.5. PINNED JOINTS: PIN D40 AND MK CONNECTOR / NODES / JOINTS
The working load of the pin D40 used in a joint of the structure:
Designation
DesignationDesignation
Designation Working load (SLS)
Working load (SLS)Working load (SLS)
Working load (SLS)
PIN E40X70
PIN E40X70PIN E40X70
PIN E40X70 426 kN
426 kN426 kN
426 kN
5.1.6. BOLTED JOINTS: WALERS AND NODES
The working load of a joint fixed with 6 bolts between Walers MK-120 and different nodes is:
Designation
DesignationDesignation
Designation Axile
Axile Axile
Axile
Max
MaxMax
Max
(SLS)
(SLS)(SLS)
(SLS) M
M M
M
Max
MaxMax
Max
(SLS)
(SLS)(SLS)
(SLS)
6
66
6-
--
-bolt joint at tension
bolt joint at tensionbolt joint at tension
bolt joint at tension 360 kN
360 kN360 kN
360 kN 0 kNm
0 kNm0 kNm
0 kNm
6
66
6-
--
-bolt joint at bending
bolt joint at bending bolt joint at bending
bolt joint at bending moment
momentmoment
moment 0 kN
0 kN0 kN
0 kN 16.4 kNm
16.4 kNm16.4 kNm
16.4 kNm
The working load of a joint fixed with 4 bolts between Walers MK-120 and different nodes is:
Designation
DesignationDesignation
Designation Axile
Axile Axile
Axile
Max
MaxMax
Max
(SLS)
(SLS)(SLS)
(SLS) M
M M
M
Max
MaxMax
Max
(SLS)
(SLS)(SLS)
(SLS)
4
44
4-
--
-bolt joint at tension
bolt joint at tensionbolt joint at tension
bolt joint at tension 240 kN
240 kN240 kN
240 kN 0 kNm
0 kNm0 kNm
0 kNm
4
44
4-
--
-bolt joint at bending moment
bolt joint at bending momentbolt joint at bending moment
bolt joint at bending moment 0 kN
0 kN0 kN
0 kN 10.6 kNm
10.6 kNm10.6 kNm
10.6 kNm
The working load of a joint fixed with 2 bolts between Walers MK-120 and different nodes is:
Designation
DesignationDesignation
Designation Axile
Axile Axile
Axile
Max
MaxMax
Max
(SLS)
(SLS)(SLS)
(SLS) M
M M
M
Max
MaxMax
Max
(SLS)
(SLS)(SLS)
(SLS)
2
22
2-
--
-bolt joint at tension
bolt joint at tensionbolt joint at tension
bolt joint at tension 120 kN
120 kN120 kN
120 kN 0 kNm
0 kNm0 kNm
0 kNm
2
22
2-
--
-bolt joint at bending moment
bolt joint at bending momentbolt joint at bending moment
bolt joint at bending moment 0 kN
0 kN0 kN
0 kN 3.7 kNm
3.7 kNm3.7 kNm
3.7 kNm
These values refer to the maximum working load of the joint at pure tension and bending moment. They do
not refer to the load combination of both.