To Next Page
C
Carrie EnglishAug 4, 2025
What to do if Ultenic D5 beeps four times?
- Jjennifer25Aug 4, 2025
If your Ultenic Vacuum Cleaner beeps four times, it indicates low power or a charging error. Manually charge the robot to resolve this issue.
What to do if Ultenic D5 beeps four times?
If your Ultenic Vacuum Cleaner beeps four times, it indicates low power or a charging error. Manually charge the robot to resolve this issue.
Why does my Ultenic Vacuum Cleaner beep three times?
Your Ultenic Vacuum Cleaner beeping three times indicates that the robot's cliff sensors are dirty, it is hanging over a drop, or it is stuck on a dark surface. Wipe its cliff sensors with a dry cloth to fix this.
General| Brand | Ultenic |
|---|---|
| Model | D5 Series |
| Category | Vacuum Cleaner |
| Language | English |
Important safety and shipping instructions for lithium-ion batteries.
Guidance on storing the robot and its battery, including disposal information.
Identifies and labels the main parts and sensors of the robot.
Details about the charging dock's components and placement.
Overview of buttons and operational modes on the remote control.
Explanation of different LED light patterns and their meanings.
Instructions for initiating and managing automatic cleaning cycles.
Details on how to perform concentrated cleaning of specific areas.
How to adjust suction power or water output for different cleaning modes.
Procedure for cleaning along walls and furniture legs.
Guidance on cleaning a single, closed-off room for a set duration.
Steps for using the robot in mopping mode with the water tank.
Instructions for setting up the remote control's clock.
Procedure to cancel an existing cleaning schedule.
Steps to remove and empty the robot's dust bin.
Instructions for cleaning the robot's filter.
How to clean the rolling brush, side brushes, swivel wheel, and sensors.
