Download the Ultenic APP and follow the
instructions in the app to complete the Wi-Fi
connection. Then you can control your robot
via this app. Refer to User Guide for further
details.
Remove the protective
film before use.
Attach the side brushes.
Fully charge the robot before use.
Turn on the robot and start cleaning.
Install AAA batteries into
the remote control.
Place the charging base on a flat surface against the wall with enough room around.
Always keep the charging base plugged in, otherwise the robot will not automatically return for
charging.
Quick Start Guide
APP QR Code
For D5 Series
Fully charged
Solid green
To Next Page
