Why can't Ultenic T10 PRO Vacuum Cleaner create a home map on the app?
If your Ultenic Vacuum Cleaner can't create a home map in the app, ensure that the robot starts cleaning from the charging station and allow the robot to automatically return to the charging station after cleaning.
What to do if Ultenic T10 PRO drive wheels are entangled?
If the drive wheels of your Ultenic Vacuum Cleaner are entangled, it means that the drive wheel is entangled or has snagged on a foreign object. Turn and press the drive wheel to check for foreign objects.
General| Brand | Ultenic |
|---|---|
| Model | T10 PRO |
| Category | Vacuum Cleaner |
| Language | English |
Basic precautions and warnings for safe operation of the robot, including handling by children.
Specifies environments and conditions where the robot should not be used, such as outdoors or for commercial purposes.
Detailed identification and labeling of the various parts and sensors on the robot unit.
Explanation of the integrated dustbin and water tank system, including inlet and outlet points.
Description of the charging station's components, such as the LED panel, dust collector port, and pads.
Interpretation of the different LED indicator lights on the robot for status and errors.
Meaning of the status lights on the charging station, indicating dust bag status and power.
Steps for assembling the charging station, connecting power, and performing the initial robot charge.
Instructions for downloading the Ultenic app and connecting the robot via Wi-Fi and Bluetooth.
How to operate the robot directly using its physical control panel buttons like Start/Pause.
Detailed guide on using the remote control for navigation, cleaning modes, and recharging.
Instructions for using the mopping function and recommended maintenance for the mop modules.
How to use the auto-empty station and procedures for replacing the dust bag.
Essential safety tips to prevent the robot from getting stuck or damaged during cleaning.
Steps for cleaning mop modules, rinsing the water tank, and drying components to prevent odor.
Instructions for cleaning the charging station, including clearing potential blockages in the dust duct.
Guidance on cleaning mapping sensors, side brushes, and other external parts of the robot.
Procedures for removing, cleaning, and reinstalling the dustbin and HEPA filter.
Instructions on how to clean the main brush assembly, potentially using the cleaning brush.
Recommended frequencies for cleaning and replacing parts to maintain optimal robot performance.
Solutions for common problems encountered when connecting the robot to the mobile application.
Troubleshooting steps for when the robot fails to dock or recharge properly at the station.
Guidance on how to resolve situations where the robot becomes entangled or stuck during operation.
Solutions for issues like bumping into objects or the robot navigating in an unorderly manner.
Addressing flashing red lights, abnormal sounds, and other operational errors.
Resolving problems related to the robot cleaning in an unorderly route or missing areas.
Addressing decreased cleaning ability or dust shedding from the dustbin.
Troubleshooting water tank function and entangled drive wheels.
Solutions for sensor detection errors, malfunction, or inability to create a home map.
Managing and resolving problems with scheduled or automatic cleaning functions.
Diagnosing issues based on flashing red light indicators on the robot or charging station.
To Next Page
