Download the Ultenic APP and follow the
instructions in the app to complete the Wi-Fi
connection. Then you can control your robot via
this app. Refer to User Guide for further
details.
Remove the protective film before
use.
Install AAA batteries into the remote control.
Place the Auto Empty Base on a flat surface against the wall with enough room around.
Always keep the Auto Empty Base plugged in, otherwise the robot will not automatically return
for charging and dust collecting.
For T10
Fully charge the robot before use.
Turn on the robot and start cleaning.
fully charged
solid green
Note :
Please DO NOT place the Auto Empty Base on rugs or carpets as it may affect the alignment of the robot
when docking.
To Next Page
