What to do if the Ultenic T10 Vacuum Cleaner remote doesn't work?
If the remote for your Ultenic Vacuum Cleaner isn't working, please check the following: * Ensure that the batteries in the remote have power. * Make sure you have powered on the robot. * Check if the battery level is critically low or empty. * Verify that the distance between the Robot and remote is within the effective range.
What does flashing red on Ultenic T10 mean?
If you observe a flashing red light accompanied by a fan error or overheating, or suspect the cover isn't closed properly on your Ultenic Vacuum Cleaner: * Frequent dust collection can lead to fan overheating protection or malfunction. It is recommended to try to collect dust after 30 minutes. * Ensure that the cover of the Auto Empty Base is completely closed.
Why is the red light flashing on my Ultenic T10 Vacuum Cleaner dust bag?
If you see a flashing red light indicating that the dust bag is not installed or installed properly in your Ultenic Vacuum Cleaner: * Check whether the dust bag is installed; if not, please install it. * Ensure that the dust bag is properly installed and fully lower the cardboard handle.
What to do if Ultenic Vacuum Cleaner loses suction or dust falls out?
If your Ultenic Vacuum Cleaner's cleaning ability has decreased or dust is falling out from the dustbin, empty the dustbin. Also, check and clean the HEPA filter and ensure the brush is free from any obstructions.
Why is my Ultenic Vacuum Cleaner not returning to Auto Empty Base?
If your Ultenic Vacuum Cleaner isn't returning to its Auto Empty Base, ensure the base is connected to a power source and that there aren't obstacles nearby; place the base in an open area. Also, the robot might be out of range, so move it closer to the base to re-establish the connection. Check if the battery level is critically low or empty. It is recommended to control the robot back to the dust empyting base before the first cleaning to let the robot memorize the starting point.
Why is the remote for my Ultenic Vacuum Cleaner not working?
If your Ultenic Vacuum Cleaner remote isn't working, make sure the batteries in the remote have power and that the robot is powered on. Check if the battery level of the robot is critically low or empty. Also, ensure the distance between the robot and the remote is within the effective range.
General| Type | Robot Vacuum Cleaner |
|---|---|
| Suction Power | 3000 Pa |
| Battery Capacity | 5200 mAh |
| Dustbin Capacity | 600 ml |
| Water Tank Capacity | 300 ml |
| Navigation | LDS Laser Navigation |
| Dimensions | 350 x 350 x 98 mm |
| Weight | 3.6 kg |
| Filter Type | HEPA Filter |
| Control | App, Voice Control |
| Charging Time | 300-360 minutes |
| Features | Multi-floor Mapping |
Important safety instructions for setup, usage, and maintenance.
Lists all included accessories and parts with the robot vacuum.
Details the components and parts of the robot vacuum cleaner.
Explains the buttons and operations of the remote control for the robot.
Guides on positioning and connecting the auto empty base unit.
Schedule for cleaning and replacing robot parts for optimal performance.
Instructions for cleaning side brush, rolling brush, and dustbin/water tank.
Lists common issues and their corresponding solutions for the robot.
To Next Page
