ULTIMEA Poseidon D80 - Wall Mount Installation

10 WALL MOUNT INSTALLATION
310mm/12.2”
41mm/1.6”
41mm/1.6”
6.5mm/0.26"
30mm / 1.2”
Note: The wall mount bracket used for the surround speakers is identical to that of the sound speaker, so the vertical hole
spacing is the same as that of the sound bar, and the installation method is also the same.
Soundbar
Surround Speaker
8 PAIRING SUBWOOFER
The subwoofer has been paired with the soundbar by
factory.
If there is no sound coming from the subwoofer, you
need to re-pair the soundbar with the subwoofer.
Step 1:
Press and hold the “SUB PAIR” button on the remote control
for 3 seconds, the display will show “ ” flashing.
Step 2:
Press and hold the ON / OFF button on subwoofer for 5
seconds, the white LED will be fast flashing.
The white LED will be always on when the subwoofer is paired
successfully.
Step 2Step 1
ON/OFF
5s
3s
SUB
PAIR
For a better listening experience, lay out the entire system as shown in the picture above.
Full 360° Surround
9 PLACEMENT RECOMMENDATION