EasyManuals Logo

ULTRASOURCE ULTRAVAC 2100 User Manual

ULTRASOURCE ULTRAVAC 2100
123 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
THE NEW STANDARD FOR INNOVATION • info@UltraSourceUSA.com • UltraSourceUSA.com
UltraSource LLC • 1414 West 29th Street • Kansas City, MO 64108-3604 USA • 800.777.5624 • 816.753.2150
2.2
STARTUP
Grounding Instructions
The Ultravac
®
2100 must be grounded. In the event of malfunction or breakdown,
grounding provides a path of least resistance for electric current to reduce the risk of electric
shock. The unit is equipped with an equipment-grounding conductor cord and a grounding
plug. The plug must be plugged into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
DANGER
Hazardous voltage.
Improper connection of the equipment-grounding conductor can result in a risk of electric
shock.
The equipment-grounding conductor outer surface is green with or without yellow
stripes. If repair or replacement of the cord or plug is necessary, do not connect the
equipment-grounding conductor to a live terminal. Check with a qualified electrician
or Ultravac Services Inc. technician if the grounding instructions are not completely
understood, or if there is doubt as to whether the unit is properly grounded. Do not modify
the plug provided with the unit – if it will not fit the outlet; have a proper outlet installed by
a qualified electrician.
DANGER
OXYGEN ENRICHED USE
ULTRASOURCE TRAY SEALING AND VACUUM CHAMBER MACHINES ARE NOT DESIGNED
FOR USE WITH OXYGEN ENRICHED PROCESS GASES. ANY APPLICATION THAT REQUIRES
A PROCESS GAS CONTAINING 25% OR MORE OXYGEN SHOULD CONTACT ULTRAVAC
SERVICES AT (800) 777-5624 AS RETROFIT OPTIONS ARE REQUIRED.
RUNNING THIS MACHINE WITH AN OXYGEN ENRICHED PROCESS GAS, WITHOUT THE
NECESSARY RETROFIT KIT COULD CAUSE SEVERE INJURY, DAMAGE OR DEATH.
ULTRASOURCE TRAY SEALING AND VACUUM CHAMBER THAT ARE RETROFITTED
WITH THE NECESSARY KIT WILL HAVE A DECAL ABOVE OR BESIDE THE GAS SUPPLY
CONNECTION INDICATING THE MACHINE’S READINESS TO RUN OXYGEN ENRICHED
PROCESS GASES.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ULTRASOURCE ULTRAVAC 2100 and is the answer not in the manual?

ULTRASOURCE ULTRAVAC 2100 Specifications

General IconGeneral
BrandULTRASOURCE
ModelULTRAVAC 2100
CategoryKitchen Appliances
LanguageEnglish