THE NEW STANDARD FOR INNOVATION • info@UltraSourceUSA.com • UltraSourceUSA.com
UltraSource LLC • 1414 West 29th Street • Kansas City, MO 64108-3604 USA • 800.777.5624 • 816.753.2150
1.1
SAFETY
SAFETY
Personal Safety
The procedures and guidelines herein must be followed precisely to avoid problems that can
result in property damage, personal injury, or death. If you have any questions related to
this information, please contact Ultravac Services Inc. at (800) 777-5624.
Hazardous voltage.
Disconnect and lockout power before servicing machine or cleaning. Do not remove panels
unless power has been disconnected and locked out at risk of electric shock hazard.
Hot oil.
Hot oil poses scalding risk. Take necessary precautions while draining warm oil.
Read and understand owner’s manual before using this machine. Failure to follow operating
instructions could result in personal injury or damage to equipment.
Explosion hazard.
Do not use a gas with an oxygen content greater than 22% with gas flush option.
Blade hazard.
Do not remove, install, or replace blades without protective gloves. Perforating knife blade
is sharp. Use care when handling.
Blade hazard.
Do not remove, install, or replace blades without protective gloves. Precut knife blade is
sharp. Use care when handling.
Cleaning agents.
Do not get the cleaning agents in eyes, on skin, or on clothing. Always wear rubber gloves,
goggles, and protective clothing when contact is likely. Consult product manufacturer for
specific details.
Signal words used in classification of potential hazards are defined as follows:
DANGER: Indicates an imminently hazardous situation, which, if not avoided, may result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or
moderate injury. Caution also indicates actions that may cause property damage.
To Next Page
Loading...
Need help?
General